Take your brewing to the next level with RIMS. Our RIMS Tube is designed for simplicity, compatibility and quality. Includes everything but element (optional upgrade) and a temperature controller / probe.
Features 304 stainless steel construction, sanitary welds and food grade tri-clamp fittings, making this a professional grade addition to any home brewery. Compatible with most 32mm (1-1/4) threaded or 2 tri-clamp element and 17mm (½) temperature probe/thermowell. Including KegKing elements and probes. Unlike other RIMS Tubes on the market, ours can be quickly disassembled down to a small size that makes cleaning, inspection and storage easy. Male ½ inlet and outlet are compatible with our unique Quick Connect fittings as well as virtually all other BSP and NPT fittings on the market.
Length (assembled, excluding element / thermowell) 425mm. 2x 20cm (8) tri-clamp spool with ½ BSP male outlet. 3x 2 food-grade silicone gasket. 2 end cap with 32mm (1-1/4) hole for element. 2 end cap with 17mm (13/16) hole for probe bulkhead (or thermowell).
Recirculating Infusion Mash System -- RIMS -- is an advanced all grain homebrewing technique that offers the efficiency benefits, consistency and clarity of precise temperature control and recirculating during mash. Recirculation means that you use the filtering properties of the grain bed to create naturally clear wort. In addition to maintaining a steady mash temperature, RIMS allows for accurate and fast temperature changes for step mashing. Our 304 Stainless Steel element comes with an Australian plug and is designed to fit our RIMS Tube's 32mm end cap.All components of our RIMS Tube are made from 100% food-grade 304 stainless steel. Welds are smooth and sanitary. Tri-clamp fittings are quickly and reliably sealed. Heat resistant, food-grade silicone gaskets seal all joins for a completely water tight system. Male inlet and outlet fittings are compatible with our range of Quick Connects as well as a virtually limitless number of standard fittings. Ball valves can be attached directly to the outlet side to control flow speed. Our ½ BSP fittings are compatible with ½ NPT fittings.
The RIMS Tube can be broken down into easy-to-clean and easy-to-store components. The two 20cm long halves of our RIMS Tube allows for easy disassembly for cleaning and inspection. The two halves can be easily and fully immersed in any brew kettle, sink or bucket for soaking with PBW, TSP or other brewery cleaning products. The halves can be rotated 360° meaning the inlet and outlet fittings can be oriented in any direction to suit your brewery. The 32mm (1-¼) cap hole is compatible with many common threaded elements available on the market, both 120V and 240V.
Compatible with Keg King and KegLand 2200W elements. The RIMS Tube can also be fitted with any 2 tri-clamp compatible elements. Comes with push fitting for any waterproof 6 - 6.7mm (1/4) diameter probe. The 17mm cap hole is compatible with many male ½ BSP and NPT fittings. There is an endless number of thermowells, probes and thermometers that will fit.You should fully disassemble and scrub the inside and out (including the threaded inlet and outlet) with detergent to remove any manufacturing grease and residue. Stainless steel must be passivated to prevent rust; we recommend a strong solution of Star San no-rinse sanitiser or citric acid. RIMS tube, tri-clamp fittings, gaskets and end caps should be thoroughly cleaned, rinsed and sanitised before use. The item "RIMS Tube 304 Stainless Steel Homebrew Tri-Clamp 1/2 BSP Fitting Home Brew" is in sale since Monday, October 16, 2017. This item is in the category "Home & Garden\Kitchen, Dining, Bar\Brewing, Distilling & Wine Making\Equipment". The seller is "weissenborn" and is located in Chapel Hill, Queensland. This item can be shipped worldwide.